Table of Content
Enjoy high fidelity sound effects with crisp clarity by making use of the well-matched component selection featured on this home cinema system with six speakers. For the bar speaker and surround speakers The nameplates are located on the bottom of the bar speaker and surround speakers. This equipment has been tested and found to comply with the limits set out in the EMC regulation using a connection cable shorter than 3 meters.
You can check the settings of the sound, night, and voice modes and current stream information. You can compress sound in accordance with the information contained in the content by setting the night mode to on. Sound is output at low volume with minimum loss of fidelity and clarity of dialog. The system does not work properly ([.DEMO] appears in the front panel display).The system is in demo mode. Press and hold and – on the subwoofer for more than 5 seconds. When you change to the TV input from the USB input by pressing INPUT, the message appears.
Panasonic DVD-Audio 5.1 Channel Home Theater Systems
BLUETOOTH connection cannot be completed.Make sure that the BLUETOOTH indicator on the subwoofer is lit. Make sure that the USB device is securely connected to the port. If the connected device supports the up sampling feature, you need to turn it off. If the input sources contain very little bass sound components (i.e., a TV broadcast), the sound from the subwoofer may be difficult to hear. There is no picture or the picture is not output correctly.Select the appropriate input. The system does not power up.Check that the AC power cord is connected securely.
Increase the volume on the connected BLUETOOTH device. If a device that generates electromagnetic radiation, such as a wireless LAN device, other BLUETOOTH devices, or a microwave oven is nearby, move the device away from this system. Make sure this system is not receiving interference from a wireless LAN device, other 2.4 GHz wireless devices, or a microwave oven.
About this product
Refer to the operating instructions of the TV for the TV settings. To save power consumption during the standby mode, set – and – to . Depending on the settings of the TV, the System Audio Control function may not be available. Press AUTO SOUND, CINEMA, MUSIC, or STANDARD to select the sound mode. The selected sound mode appears in the front panel display. Appears for 2 seconds at the bottom left side when an unsupported file is skipped.
Appears in the front panel display of the subwoofer, the sound is muted, and buttons on the remote control or subwoofer other than do not work.The protection feature is activated. Press to turn the system off and disconnect the AC power cord and check the items below. When connecting to the mobile device with the BLUETOOTH function, you can operate by simply using the supplied remote control without turning the TV on. Move the bar speaker away from the TV within a range that allows those parts to operate properly.
Home Theatre & Sound Bars
Enable the Control for HDMI function of the devices connected to the system. For details, refer to the operating instructions of your device. No sound or only a very low-level sound of the device connected to the system is heard from the system.Press + and check the volume level. The system supports the Dolby Digital and PCM audio formats.
If you turn on the system while you are watching the TV, the TV sound will be output from the speakers of the system. The volume of the system can be adjusted using the TV remote control. If the TV sound was output from the speakers of the system the previous time you watched the TV, the system will be turned on automatically when you turn on the TV again. For details, refer to the operating instructions of your TV. • To play multi channel audio, check the digital audio output setting on the device connected to the system. For details, refer to the operating instructions supplied with the connected device.
With the superb frequency response featured on this home cinema system with six speakers, you can hear clean highs and powerful bass tones. With the expansive six speaker sound system on this Panasonic Sa-ht670 home entertainment system, you can bring your television viewing alive with clear sound. Because the Panasonic Home Theater System includes a powerful amp, you can enjoy crystal clear speech and beautiful soundtracks.
To view the USB content list on the TV screen, make sure you connect the system to the TV using an HDMI cable. The front panel display and BLUETOOTH indicator light up in the following statuses even if you set the brightness setting to . Each time you press DIMMER, the brightness setting changes cyclically as follows. Are true multi-faceted with all the multimedia tools that should be expected.
If you enable the Control for HDMI function when using a TV manufactured by Sony, the Control for HDMI function of the system is also enabled automatically. The screw should protrude as in the illustration. Fasten the screws into the marks on SCREW LINE of WALL MOUNT TEMPLATE as in the illustration below. Payments under $1,000 will be automatically charged to the credit card on file immediately following the auction. When you receive your invoice at the completion of the auction there will be a link to our scheduling system that will display all the available pick up time slots. All items must be removed by Friday, July 30th.
If the USB device is connected via a USB hub, disconnect it and connect the USB device directly to the subwoofer. When the Control for HDMI function is set to on and the input of the system is the TV input, the system turns off automatically when you turn off the TV. The system does not turn off even when the TV is turned off. Note When you turn the system off, the night mode is set to off automatically.
No comments:
Post a Comment